The Study of Prefabricated Construction Methods for Mass Tread Housing Construction. Case Study: Dian Sukolilo Regency Housing, Surabaya

Authors

  • stefanie susanto petra christian university

DOI:

https://doi.org/10.9744/duts.6.2.49-63

Keywords:

prefabrication, mass housing, mass housing developers.

Abstract

This paper discusses the prefabricated construction method by taking a case study of Dian Sukolilo Regency housing construction, Surabaya. Prefabricated construction methods are able to provide faster construction times and better quality. Stages of research will be carried out by processing real data with a simulation calculation approach to obtain the calculation of the budget plan and estimated time of construction using the prefabrication method. The main variables that influence this prefabricated construction method are four namely cost, time, quality and number of units. The increasing number of units will reduce the cost of construction of the construction unit using the prefabrication method. The results of each research calculation will guide the interview to find out the response of the housing developer to the prefabricated construction method whose results will be the conclusion of the study.

References

Aderiani, Tantyonimpuno, R. S., & Adi, T. J. W. (2005). Identifikasi konflik yang terjadi pada pelaksanaan proyek konstruksi gedung. Prosiding Seminar Nasional Manajemen Teknologi I.

Akhmad, Abd. Gani dan Fachruddin, Pudji A. (2008, Februari). Disain rumah tinggal konstruksi “ knock down”. Jurnal Smartek, Vol. 6, No. 1
.
Anderson, Mark and Peter Anderson. (2007) Prefab prototypes : site specific for offsite construction. New York: Princeton Architectural Press.

Davies, Collin. (2005). The prefabricated home. Reaktion Books Ltd

Dekoruma. (2019). Tujuh tipe rumah terpopuler di Indonesia. <https://www.dekoruma.com/artikel/64473/tipe-rumah-terpopuler> (June 3, 2019)

Diela, Tabita. (2014, June 14). Material prefabrikasi solusi “backlog” rumah. Kompas Cyber Media. <http://www.kompas.co.id> (December 14, 2018)

Duarte, J. P. (2001). Customizing mass housing: A discursive grammar for siza’s malagueira houses. Thesis (Ph.D.). Massachusetts Institute of Technology.

Glass, Jacqueline. (2000, June). The future for precast in low-rise housing. British Precast Concrete Federation

Hardjomuljadi, S., Abdulkadir, A., & Takei, M. (2006). Strategi klaim konstruksi berdasarkan FIDIC conditions of contract. Jakarta : Pola Grade.

Heizer, J., Render B., (2005). Operation Management. New Jersey :Prentice Hall

Huang, J. C. (2005). Integrating mass customization with prefabricated housing. Ph.D. Thesis Proposal (unpublished), Illinois Institute of Technology.

Huang, J.C., Krawczyk, R.J., (2006). Mass customizing prefabricated modular housing by internet- aided design. Thesis Proposal (unpublished), Illinois Institute of Technology

Kieran, S. and Timberlake, J. (2004). Refabricating architecture: How manufacturing methodologies are poised to transform building construction. New York: McGraw-Hill Companies, Inc
.
Lamudi, (2018,May). Ini dia lokasi plaing hot untuk investasi properti di Surabaya. <https://www.lamudi.co.id/journal/ini-dia-lokasi-paling-hot-untuk-investasi-properti-di-surabaya/> (May 3, 2018)

Larasati, D., Primasetra, A., Fadhly,F. (2016). Pengembangan Industri Rumah Sederhana Prafabrikasi, Belajar dari Kearifan Lokal. Makalah dipersentasikan di Temu Ilmiah IPLBI 2016

Larson, K., Intille S., McLeish T., Beaudin J., and Williams R. (2004, October). Open source building: Reinventing places of living. BT Technology Journal, Vol. 22 No. 4.

Larson, K., Tapia M., and Duarte J. (2001, March). A new epoch: Automated design tools for the mass customization of housing. A+U Journal, Vol. 366.

McGraw-Hill Construction. (2001). Prefabrication and modularization, increasing productivity in construction industry. Smart Market Report.

Roychansyah, M. S,. (2006). Perkembangan rumah prefabrikasi. Repositori Universitas Gadjah Mada : Berita Iptek Online.

Sandewa, Maesha (2015). Prinsip konstruksional pada konstruksi prefabrikasi. <https://www.arctofia14.blogspot.com/2015/07/prinsip-konstruksional-pada-konstruksi.html> (July 31, 2015)

Schodek, D., Becthhold M., Griggs K., Kao K., and Steinberg M. (2004). Digital design and manufacturing: Cad/ cam applications in architecture and design. New Jersey: John Wiley & Sons, Inc.

Shaikh, Samir. (2017, December). Mass Production for Mass Housing. Linkedin.

Thornton, R. (2004). The Houses That Sears Built. Alton, IL: Gentle Beam Publications.

Warou, Fela. (2014, Agustus). Pendekatan desain berkelanjutan pada perumahan kota di Indonesia ‘for better engineering’. Jurnal Media Matrasain, Vol 11, No. 2.

Wibawa, Agus. (2016, February 22). Enam keunggulan data center prefabrikasi. Kompas Cyber Media. http://www.klasika.kompas.co .id (December 4, 2016)

Wikipedia ensiklopedia bebas. (2020).Prefabrikasi. <http://id.wikipedia.org/wiki/Prefabrikasi> (June 10, 2020)

Zipkin, Paul. (2001). The limits of mass costumization. MIT Sloan Management Review, Massachusetss Institute of Technology.

Downloads

Published

2019-10-31

How to Cite

susanto, stefanie. (2019). The Study of Prefabricated Construction Methods for Mass Tread Housing Construction. Case Study: Dian Sukolilo Regency Housing, Surabaya. Dimensi Utama Teknik Sipil, 6(2), 49–63. https://doi.org/10.9744/duts.6.2.49-63