APLIKASI VALUE ENGINEERING PADA PEMILIHAN ELEMEN FASAD
DOI:
https://doi.org/10.9744/duts.8.1.01-16Keywords:
rekayasa nilai, fasad, panel pengisiAbstract
Perkembangan tampak bangunan konstruksi khususnya pada pemilihan material fasad menjadi hal yang tidak dapat diremehkan untuk mencegah kecacatan dalam sistem fasad yang terintegrasi pada bangunan. Penerapan Rekayasa Nilai pada elemen fasad secara sistematis dapat memberikan alternatif terbaik dalam pemilihan material fasad. Penerapan Rekayasa Nilai akan dilaksanakan bangunan Showroom yang memiliki sistem fasad dan pada elemen fasad tersebut akan diterapkan rencana kerja Rekayasa Analisa yaitu tahap informasi, tahap kreatif, tahap analisa, dan tahap rekomendasi. Elemen yang telah melewati rencana kerja Rekayasa Nilai selanjutnya akan dianalisa lebih detail secara keuntungan dan kerugian nya untuk mendapatkan hasil yang optimal. Dengan penerapan Rekayasa Nilai pada pemilihan elemen fasad pada bangunan Showroom Adiputro didapatkan Alternatif pengganti pada bagian Kaca Showroom adalah Laminated Glass sedangkan untuk alternatif pengganti double skin façade showroom adalah Aluminium Luxalon Miniwave.
References
Al-Yafei, E., Ogunlana, S., & Oyegoke, A. (2017). “Application of value engineering and life cycle costing techniques for offshore topside facility projects : towards sustainability.” Paper presented at the SPE Kuwait Oil & Gas Show and Conference 2017, Kuwait.
Arumsari, P., & Tanachi, R. (2018). “Value engineering application in a high rise building (a case study in bali).” Paper presented at The 2nd International Conference on Eco Engineering Development 2018, Tangerang.
Atabay, S., & Galipogullari, N. (2013). “Application of value engineering in construction projects.” Journal of Traffic and Transportation Engineering. 1(1), 39-48.
Berawi. M. A. (2014). Aplikasi Value Engineering pada Industri Konstruksi Bangunan Gedung. Universitas Indonesia, Jakarta.
Bertolini, V., & Wisnumurti, Zacoeb, A. (2015). “Aplikasi value engineering pada proyek pembangunan gedung (studi kasus hotel grand banjarmasin).” Unpublished undergraduate thesis, Universitas Brawijaya, Malang.
Brooke, A. J. (2002). Cladding of buildings (3rd ed). London : E & FN Spon.
Canada Mortgage and Housing Corporation. (2004). Glass and metal curtain walls. Canada : Author.
Dell’Isola, A.J. (1975). Value engineering in the construction industry. New York: Van Nostrand Reinhold.
El-Nashar, W. Y., Elyamany, A. H. (2018). “Value engineering for canal tail irrigation water problem.” Ain Shams Engineering Journal. 9. 1989-1997.
Fisk, E. R. (1997). Construction project administration, (5th ed). New Jersey: Upper Saddler River.
Hartono, E., & Suradi. (1989). “Penerapan value engineering pada perencanaan hanggar merpati nusantara di juanda – surabaya.” Unpublished undergraduate thesis. Universitas Kristen Petra, Surabaya.
Iskandar, A. (2014). “Studi komparasi life cycle cost energi pada gedung apartemen.” Unpublished postgraduate thesis, Universitas Kristen Petra, Surabaya.
Kelly, J., & Male, S. (1993). Value Management in design and construction. Edinburgh: E & FN Spon.
Kelly, J., Male, S. & Graham, D. (2004). Value management in construction projects. Oxford: Blackwell Publishing.
Kim, T., Lee, H. W., & Hong, S. (2016). “Value engineering for roadway expansion project over deep thick soft soils.” Journal Construction Engineering Management, 142(2). 1-9.
Lee, J. (2018). “Value engineering for defect prevention on building facade.” Journal Construction Engineering Management, 144(8). 1-8.
Macedo, M C., & Dobrow, Paul V., & O’Rouke, Joseph J. (1977). Value management for construction. New York: A Wiley-Interscience Publications.
Manggala, H. P., & Utomo, C. (2014). “Penerapan rekayasa nilai pada proyek pembangunan rumah tipe 39 di perumahan sapphire park regency surabaya.” Jurnal Teknik Pomits, 3(2), 137-142.
Mcgeorge, D., & Palmer, A. (1997). Construction management new direction. British: Black Well Science Ltd.
Memari, A. M. (2013). Curtain wall systems : a primer. Virgina : American Society of Civil Engineers.
Moghtadernejad S. (2019). “Façade Design Stages: issues and Considerations.” Journal of Architect Engineering. 25(1), 040180331-0401803310.
Prieto, A. M. (2015). “Tolerance management of aluminium-framed curtain wall systems : a case study.” Unpublished postgraduate thesis, A&M University, Texas.
Priyo, M., & Hermawan, T.D. (2010). “Aplikasi value engineering pada proyek konstruksi.” Jurnal Ilmiah Semesta Teknika, 13(2), 116-129.
Tjakra, J., & Walangitan, D. R. O. (2016). “Penerapan value engineering pada proyek pembangunan gereja gmim syaloom karombasan.” Jurnal Sipil Statik, 4(2), 95-103.
Wicaksono, A.Y., & Utomo, C. (2012). “Penerapan value engineering pada pembangunan proyek universitas katolik widya mandala pakuwon city - surabaya.” Jurnal Teknik ITS, 1(1), 56-62.
Winata, S., & Santoso, D. (2011). “Studi kasus penerapan rekayasa nilai pada suatu proyek rumah tinggal.” Unpublished undergraduate thesis. Universitas Kristen Petra, Surabaya.
Zimmerman, L.W. & Hart, G.D. (1982). Value engineering: a practical approach for owner, designers and contractors. New York: Van Nostrand Reinhold
Arumsari, P., & Tanachi, R. (2018). “Value engineering application in a high rise building (a case study in bali).” Paper presented at The 2nd International Conference on Eco Engineering Development 2018, Tangerang.
Atabay, S., & Galipogullari, N. (2013). “Application of value engineering in construction projects.” Journal of Traffic and Transportation Engineering. 1(1), 39-48.
Berawi. M. A. (2014). Aplikasi Value Engineering pada Industri Konstruksi Bangunan Gedung. Universitas Indonesia, Jakarta.
Bertolini, V., & Wisnumurti, Zacoeb, A. (2015). “Aplikasi value engineering pada proyek pembangunan gedung (studi kasus hotel grand banjarmasin).” Unpublished undergraduate thesis, Universitas Brawijaya, Malang.
Brooke, A. J. (2002). Cladding of buildings (3rd ed). London : E & FN Spon.
Canada Mortgage and Housing Corporation. (2004). Glass and metal curtain walls. Canada : Author.
Dell’Isola, A.J. (1975). Value engineering in the construction industry. New York: Van Nostrand Reinhold.
El-Nashar, W. Y., Elyamany, A. H. (2018). “Value engineering for canal tail irrigation water problem.” Ain Shams Engineering Journal. 9. 1989-1997.
Fisk, E. R. (1997). Construction project administration, (5th ed). New Jersey: Upper Saddler River.
Hartono, E., & Suradi. (1989). “Penerapan value engineering pada perencanaan hanggar merpati nusantara di juanda – surabaya.” Unpublished undergraduate thesis. Universitas Kristen Petra, Surabaya.
Iskandar, A. (2014). “Studi komparasi life cycle cost energi pada gedung apartemen.” Unpublished postgraduate thesis, Universitas Kristen Petra, Surabaya.
Kelly, J., & Male, S. (1993). Value Management in design and construction. Edinburgh: E & FN Spon.
Kelly, J., Male, S. & Graham, D. (2004). Value management in construction projects. Oxford: Blackwell Publishing.
Kim, T., Lee, H. W., & Hong, S. (2016). “Value engineering for roadway expansion project over deep thick soft soils.” Journal Construction Engineering Management, 142(2). 1-9.
Lee, J. (2018). “Value engineering for defect prevention on building facade.” Journal Construction Engineering Management, 144(8). 1-8.
Macedo, M C., & Dobrow, Paul V., & O’Rouke, Joseph J. (1977). Value management for construction. New York: A Wiley-Interscience Publications.
Manggala, H. P., & Utomo, C. (2014). “Penerapan rekayasa nilai pada proyek pembangunan rumah tipe 39 di perumahan sapphire park regency surabaya.” Jurnal Teknik Pomits, 3(2), 137-142.
Mcgeorge, D., & Palmer, A. (1997). Construction management new direction. British: Black Well Science Ltd.
Memari, A. M. (2013). Curtain wall systems : a primer. Virgina : American Society of Civil Engineers.
Moghtadernejad S. (2019). “Façade Design Stages: issues and Considerations.” Journal of Architect Engineering. 25(1), 040180331-0401803310.
Prieto, A. M. (2015). “Tolerance management of aluminium-framed curtain wall systems : a case study.” Unpublished postgraduate thesis, A&M University, Texas.
Priyo, M., & Hermawan, T.D. (2010). “Aplikasi value engineering pada proyek konstruksi.” Jurnal Ilmiah Semesta Teknika, 13(2), 116-129.
Tjakra, J., & Walangitan, D. R. O. (2016). “Penerapan value engineering pada proyek pembangunan gereja gmim syaloom karombasan.” Jurnal Sipil Statik, 4(2), 95-103.
Wicaksono, A.Y., & Utomo, C. (2012). “Penerapan value engineering pada pembangunan proyek universitas katolik widya mandala pakuwon city - surabaya.” Jurnal Teknik ITS, 1(1), 56-62.
Winata, S., & Santoso, D. (2011). “Studi kasus penerapan rekayasa nilai pada suatu proyek rumah tinggal.” Unpublished undergraduate thesis. Universitas Kristen Petra, Surabaya.
Zimmerman, L.W. & Hart, G.D. (1982). Value engineering: a practical approach for owner, designers and contractors. New York: Van Nostrand Reinhold
Downloads
Published
2021-04-30
How to Cite
Surja, A., Budiman, J., & Nugraha, P. (2021). APLIKASI VALUE ENGINEERING PADA PEMILIHAN ELEMEN FASAD. Dimensi Utama Teknik Sipil, 8(1), 01–16. https://doi.org/10.9744/duts.8.1.01-16
Issue
Section
Articles
